BGMK fitted to Sewage treatment works at Trowbridge

The first BGMK (manual klean filter unit) has been installed at a Wessex Water Sewage Treatment Works (STW) in Trowbridge, UK.

The unit  was installed to clean STW BioGas for a small single engine. The filter contains sufficient media to last 3 months before needing to be manually regenerated on site. The filter contains the same media that is used in the automatic regeneration installed at the landfill site in Humberside, UK.

Bill Cowing, Director of Sales and Marketing commented “This installation, following the earlier BGAK at Humberside, will confirm our filter units capabilities in treating STW BioGas”.
“ Releasing this unit to the market will allow our customers to cost effectively treat BioGas for smaller installations, gas flows and contamination. It is important for PpTek to widen its  range of capability in this market”.

BioGas Filters are available now to treat gas flows from 75 m3 / hr to over 2000 m3 / hr, cost effectively treating Landfill and STW BioGas.

BGAK fitted to landfill site at Humberside UK.

A follow up installation of a BGAK filter has been made on a Waste Recycling Group (WRG) Landfill site in the UK.

The unit has performed to the PpTek specification removing the Siloxanes in the Landfill gas to less than 1mg/m3, with the media successfully regenerated automatically on site. The pressure drop across the filter exceeded design parameters dropping only 0.7mb.

David Hayward, Director of Product Development, commented:- “Our follow up installation at the WRG landfill site in Humberside, UK was completed smoothly. The 1.15M Jenbacher engine, that it is feeding treated gas to, is running well and we hope to see confirming results from the site soon”.

Bill Cowing, Director of Sales and Marketing added “This installation, following on from the earlier one at Rigby, will further confirm our filter units capabilities in treating BioGas in this market”.